Sidiz T50 Air light Purchase Price Features Review! highend chair

 Review of Sidiz(CDZ) t50 air light chair

Hello, I'm Zermang. Today, we will review Korea's first million seller chair, Sidiz t50. The exact name is t500hlda white-shell mesh chair. In fact, this chair was purchased and used by a colleague at my own expense in my office, but I purchased it secondhand and reviewed it. Not only me, but also the friend's actual experience review will be delivered in detail.

First of all, let me tell you the basic explanation of the product. The product was named T500HLDA. Here, H means the presence or absence of a headrest, L means the presence or absence of a Lumber Support, D means the presence or absence of an adjustable seat, and finally A means the presence or absence of an armrest, that is, an armrest. So you can understand that this chair model I'm going to review is a model with all options.

Price and brief introduction.

And the price was about 290,000 won based on the lowest price. But in fact, this is a chair with more other options. There are additional things such as hangers on the back of the chair. And it says on the website that a/s is free of charge, but after that, it says paid a/s. It was one of the parts that I was disappointed that the period felt a little short. When I searched on the Internet about a/s, I think many people say that a/s itself is a bit cumbersome and difficult. We've never done a/s in person, so it's hard to tell you about this in person.

Not only about a/s, but also about drawing lots, I think. When I tried it myself, I wondered if it was a problem with the lottery or the chair itself. I'll explain this part again later. Then I'll solve the questions that you're most curious about. T50 and t80 are famous for the chair of the series. Is there a big difference between these two chairs? First of all, to tell you the conclusion, there is a difference. But in fact, it's hard to say that there's a big difference.

In fact, one of the biggest advantages I mentioned in t80 was the softness of tilting. The t50 chair also had that softness. And now, it wasn't bad to have any kind of confidence in the cushion. So when I first sat down, I thought t50 was not far behind t80. And I thought t80 would be better in terms of overall luxury, manipulation, and detail. However, the price of t80 is almost double that of t50. If there is such a big difference to pay this value at this price, I think we need to think about that a little bit.

A headrest.

First of all, the headrest, which is a headrest, is made of artificial leather. And it can be adjusted back and forth. You can also adjust up and down. For my height, the headrest was right at the bottom. But when the headrest moved, it felt a little stiff. I didn't know if the T50 chair was originally stiff on the headrest or because it was used. It's stiff for me as a woman, but I don't think it's that stiff for men. 

the broad of the back

And I'll tell you about taking the mound. The material of the back is mesh material. It's very tangy. Although this chair has been used for two years, it doesn't feel stretched or worn out at all. So the friend who used it was one of the parts that I was quite satisfied with at this time. And one of the advantages of this chair is the lumbar spine support. It can be adjusted up and down, and the difference from other lumbar supports is that it can be adjusted in depth. So when you loosen it, it flows down. And if you tighten this, you can see the lumbar spine coming inside. So you can adjust the depth in here, and now you can adjust it up and down.

In fact, I bought it because I heard that it was an attractive point, but in fact, as I used it, it was a useless function in the world. Because if you tighten it and use it, it loosens and flows down, and it doesn't support it well. So I had a lot of complaints about this. The drawing problem I mentioned earlier was related to this. There's a lot of talk about this on the Internet. So it hasn't been long since I bought it, but there were a lot of comments saying that it's already flowing down and that it keeps peeling off. As a result, it was somewhat doubtful whether this was a problem of lottery or durability of the product line itself. 

And I've talked about the problem of flowing down in t80. In my case, maybe because I didn't push back a lot, t80 was like that, and T50 didn't recognize the problem that it was flowing down like that. But I definitely felt it as I used it, and seeing so many reviews on the Internet, I thought there was a problem.

Tilt.

And this chair was quite soft in tilting. In my case, I almost released this lever and used it. So on this side, it's loosened up, but if you use it after loosening it, it'll fall back very well and you can adjust the strength according to your weight or force. Basically, this chair was a chair that could not be adjusted in height. Instead, there were adjustments in the strength and level of tilting. 

It can be operated through the lever in the lower right front. If you turn the strength of the tilting clockwise, it is tightened it. And if you untie it, you untie it with a counterwatch. In my case, I almost untied it and used it. It tends to fall back smoothly and well. As I told you in t80, it doesn't come up sharply after cutting, but it comes up smoothly. I used it satisfactorily in terms of the softness of tilting.

And the step adjustment of the tilting can be operated with a flat lever at the bottom left. The intensity adjustment of the tilting is the left lever. The step adjustment of tilting feels a little uncomfortable. The step adjustment of other chairs is usually adjusted to an intuitive structure depending on the position of the lever. However, t50 requires two manipulations. It's a method that allows you to adjust the angle as you want while loosening it, and tightening it again. The data says that up to level 5 can be adjusted, but I felt that it was about level 3. 

Armrest.

Next, I'll tell you the armrest. Armrests can basically be adjusted up and down. It goes up a lot, but it doesn't go down a lot. It can be adjusted back and forth, and even the angles on both sides can be adjusted. Perhaps because this friend didn't use it, it was adjusted to be stiff. And it didn't feel that the length was moderately long. If you measure the length yourself, it's about 260mm. The cushioning felt moderately hard and slightly fluffy. I don't think there's such a big special feature, but it's good to know that it's a little shaky.

Sitting board.

Next, let's talk about the stands. The seat is made of fabric. Memory foam and high elastic sponge were used. The cushion wasn't bad enough. In the case of this chair, it's been a while since I used it, so it may have been a little less cushioning, but it wasn't bad for two years. If you look closely, you can see the grain. Because of the texture, some foreign substances were caught in between. When I went to the website and checked, I think the new chairs are not fabrics made of payment, but fabrics made of smooth materials. Those things did seem fine.

And you can adjust the front and back of the seat with the lower right lever. In the case of this chair, it was a little uncomfortable to sit down and control. So I think it would be convenient to get up and take it off and put it on yourself. And with the lower left lever, the tilting angle of the seat is adjusted. This is also stiff and uncomfortable to operate. It'll be hard to sit down, and you can get up and control it. I rarely use tilting angle adjustment.

And it is said that the seat can be replaced. This is called a purchase point. The velcro is at the bottom of the chair, and when you take it off and take it off, the chair seat comes off. When I actually bought it, I bought it because it looked good, but I didn't change it. Unless it's a problem such as spilling coffee or forming a big stain, the seat doesn't seem to be replaced well. 

the legs of a chair

And the caster, the bridge of the chair, was made of nylon caster. This friend especially has a sitbreaker caster. I added an option. So if you push the chair, there is no big difficulty in pushing it, but if you put even a little force, it gets blocked and doesn't move well. In my case, I usually sit in a chair first and then push it with my hip strength to come back to my seat, which may be a little uncomfortable for such a person. My friend hates moving once he sits down. For people like this, I think this sitbreaker option will be a good function.

Overall review.

Lastly, I'll give you a general review. From the office chair, the CDZ t50 seems to be a really suitable and easy chair. It seems that it can cover various body types and heights. I also used it quite satisfactorily. However, compared to the price and reputation of the CDZ chair, the detailed sense of operation and the softness of the lever were a little disappointing. And there seems to be room for improvement in quality-related problems such as the as problem mentioned earlier and the lottery. That's all for today's review of Sidiz Chair t50. Thank you so much for reading the long review.